Mechanical behaviour of epoxy resins in the glassy state

 

 

1) BARDELLA L. (1997). Comportamento a rottura di un materiale composito in resina polimerica e microsfere cave in vetro (in Italian). Laurea thesis in Civil Engineering, University of Brescia.

2) BARDELLA L., CARINI A., GENNA F. (1999). Analisi delle proprietà chimiche, fisiche e micromeccaniche di un materiale composito in sandwich di schiuma sintattica e fibra di vetro preimpregnata. Analisi delle caratteristiche meccaniche di resine base della schiuma sintattica (in Italian). Technical Report n.6/1999, Department of Civil Engineering, University of Brescia.

3) BARDELLA L. (2000). A phenomenological constitutive law for epoxy resins. GIMC 2000 - XIII Italian Conference on Computational Mechanics, Brescia (Italy). 13-15 November. (pp. 65-71). ISBN: 88-86524-47-1.

4) PRANDINI M., BARDELLA L. (2000). Identification of a constitutive model for epoxy resins. GIMC 2000 - XIII Italian Conference on Computational Mechanics, Brescia (Italy). 13-15 November. (pp. 125-131). ISBN: 88-86524-47-1.

5) BARDELLA L. (2000). Mechanical behavior of glass-filled epoxy resins: experiments, homogenization methods for syntactic foams, and applications. PhD thesis, University of Brescia.

6) BARDELLA L. (2001). A phenomenological constitutive law for the nonlinear viscoelastic behaviour of epoxy resins in the glassy state. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS. vol. 20/6, pp. 907-934 ISSN: 0997-7538. DOI

7) BARDELLA L. (2002). On the modeling of the nonlinear viscoelastic behavior of epoxy resins. Seventh Pan American Congress of Applied Mechanics (PACAM VII), Temuco (Chile). 2-4 January. (vol. 9, pp. 229-232). Applied Mechanics in the Americas edited by P. Kittl, G. Diaz, D. Mook, J. Geer.

8) BARDELLA L. (2003). A phenomenological model for the rheology of epoxy resins in the glassy state. XIV Italian ABAQUS Users' Meeting, Brescia (Italy). 5-7 November.

9) BARDELLA L., BELLERI A. (2010). On the viscoelastic and viscoplastic behaviour of epoxy resins. Fourth Meeting of the AIMETA Materials Group (GMA2010), Palermo (Italy). 25-26 February.

10) BARDELLA L., BELLERI A. (2011). Two features of the uniaxial compression of a glassy epoxy resin: the yield stress rate-dependence and the volumetric instability. MECHANICS OF TIME-DEPENDENT MATERIALS. vol. 15/3, pp. 255-275 ISSN: 1385-2000. DOI

11) SHAMS A., PANTEGHINI A., BARDELLA L., PORFIRI M. (2017). A micromechanical model to study failure of polymer-glass syntactic foams at high strain rates. COMPUTATIONAL MATERIALS SCIENCE. vol. 135, pp. 189-204 ISSN: 0927-0256. DOI