Mechanical behaviour of syntactic foams:
homogenization techniques and micromechanical analysis of the failure
modalities 1) BARDELLA L. (1997). Comportamento
a rottura di un materiale composito in resina polimerica e microsfere cave
in vetro (in Italian). Laurea thesis in Civil Engineering, University of
Brescia. 2) BARDELLA L., GENNA F. (1999).
Analisi delle proprietà chimiche, fisiche e micromeccaniche di un
materiale composito in sandwich di schiuma sintattica e fibra di vetro
preimpregnata. Analisi micromeccanica della schiuma sintattica (in Italian). Technical Report
n.7/1999, Department of Civil Engineering, University of Brescia. 3) BARDELLA L. (1999). Mechanical
behaviour of syntactic foams: experimental results and estimates of the
effective elastic moduli. Technical Report n.14/1999, Department of Civil Engineering,
University of Brescia. 5) BARDELLA
L., GENNA F. (2001). On
the elastic behavior of syntactic foams. INTERNATIONAL JOURNAL OF SOLIDS
AND STRUCTURES. vol. 38/40-41, pp. 7235-7260 ISSN: 0020-7683.
DOI
6) BARDELLA L. (2001). A
phenomenological constitutive law for the nonlinear viscoelastic behaviour
of epoxy resins in the glassy state. EUROPEAN JOURNAL OF MECHANICS
A-SOLIDS. vol. 20/6, pp. 907-934 ISSN: 0997-7538.
DOI
7) BARDELLA
L., GENNA F. (2002). Unit
cell analysis of the nonlinear behaviour of glass/epoxy syntactic foams.
EUROMECH Colloquium 438 on Constitutive Equations for Polymer
Microcomposites, Vienna (Austria). 15-17 July. (pp. 100-101). Book of Abstracts edited by
L. Dorfmann, A.D. Drodzov, R.W. Ogden. ISBN: 3-900962-40-5. 8) BARDELLA L. (2003). An extension
of the Secant Method for the homogenization of the nonlinear behavior of
composite materials. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE. vol.
41/7, pp. 741-768 ISSN: 0020-7225.
DOI
9) BARDELLA L. (2003). Discussion on
the paper "Simulation of porosity by microballoon dispersion in epoxy
and urethane: Mechanical measurements and models" by M. A. El-Hadek
and H. V. Tippur, Journal of Materials Science, 37, 1649-1660, 2002, [1].
JOURNAL OF MATERIALS SCIENCE LETTERS. vol. 22/22, pp. 1643-1646 ISSN:
0261-8028.
DOI
11) SBURLATI R., BARDELLA L. (2009).
Three-dimensional elastic analysis for inhomogeneous plates (FGMS).
Third Meeting of the AIMETA Materials Group
(GMA09), Milano (Italy). 23-24 January.
12) BARDELLA L., SFREDDO A., VENTURA C., GUPTA N., PORFIRI M. (2011).
A comparison among different homogenisation techniques for
estimating the effective elastic moduli of syntactic foams.
ECI Conference Syntactic and Composite Foams III, Cetraro (Italy). 29 May-3 June.
13) BARDELLA L., SFREDDO A., VENTURA C., PORFIRI M., GUPTA N. (2012).
A critical evaluation of micromechanical models for syntactic foams.
MECHANICS OF MATERIALS. vol. 50, pp. 53-69 ISSN: 0167-6636.
DOI
14) BARDELLA L., FESTA A., PORFIRI M. (2012).
Micromechanical models for the failure modalities of syntactic foams
subject to uniaxial compression.
Sixth Meeting of the AIMETA Materials Group
(GMA2012), Lucca (Italy). 13-14 April.
15) BARDELLA L., MALANCA F., PONZO P., PANTEGHINI A., PORFIRI M. (2013).
Micromechanical finite element modelling of the quasi-brittle
failure of syntactic foams subject to uniaxial compression.
CERMODEL 2013, Trento (Italy). 10-12 July.
16) BARDELLA L., MALANCA F., PONZO P., PANTEGHINI A., PORFIRI M. (2014).
A micromechanical model for quasi-brittle compressive failure of glass-microballoons/thermoset-matrix syntactic foams.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. vol. 34/11, pp. 2605-2616 ISSN: 0955-2219.
DOI
17) BARDELLA L., PANTEGHINI A. (2014).
On the compressive strength of glass-microballoons/thermoset-matrix syntactic foams.
XX Italian Conference on Computational Mechanics and VII Meeting of the AIMETA Materials Group
(GIMC-GMA2014), Cassino (Italy). 11-13 June.
18) PANTEGHINI A., BARDELLA L. (2015).
On the compressive strength of glass microballoons-based syntactic foams.
MECHANICS OF MATERIALS. vol. 82, pp. 63-77 ISSN: 0167-6636.
DOI
19) BARDELLA L., PANTEGHINI A. (2015).
On the compressive strength of glass-microballoons/thermoset-matrix syntactic foams.
State of the art and challenges in thermal and mechanical modelling
of ceramic materials, Trento (IT). 20 March.
20) PERINI G., BARDELLA L., PANTEGHINI A., GUPTA N., PORFIRI M., TESSIER N. (2017).
Failure behaviour of glass-microballoons/thermoset-matrix syntactic
foams subject to hydrostatic loading.
ECI Conference Syntactic and Composite Foams V, Siracusa (Italy). 26-31 March.
21) SHAMS A., PANTEGHINI A., BARDELLA L., PORFIRI M. (2017).
A micromechanical model to study failure of polymer-glass syntactic foams at high strain rates.
COMPUTATIONAL MATERIALS SCIENCE. vol. 135, pp. 189-204 ISSN: 0927-0256.
DOI
22) BARDELLA L., PERINI G., PANTEGHINI A., TESSIER N., GUPTA N., PORFIRI M. (2018).
Failure of glass-microballoons/thermoset-matrix syntactic foams subject to
hydrostatic loading.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS. vol. 70, pp. 58-74 ISSN: 0997-7538.
DOI
23) BARDELLA L., PERINI G., PANTEGHINI A., TESSIER N., GUPTA N., PORFIRI M. (2019).
Failure of glass-microballoons/thermoset-matrix syntactic foams subject to hydrostatic loading.
Workshop on Mechanical and Acoustic Properties of Syntactic Foams.
Manchester (UK). 10-11 October.
24) BARDELLA L. (2021). Syntactic foams research and applications: an update from Europe.
Virtual panel discussion organised by New York University, 12 February.
|