Pubblicazioni di Lorenzo Bardella
Link a Web of Science (articoli ISI, citazioni, revisioni, etc.)
Link a Scopus Author ID (articoli ISI, citazioni, etc.)
Link a Google Scholar (articoli, citazioni, etc.)
1) BARDELLA L. (2020). Strain Gradient Plasticity. In: Encyclopedia of Continuum Mechanics, edited by H. Altenbach and A. Öchsner, Springer-Verlag, Berlin Heidelberg, pp. 2330-2341. ISBN: 978-3-662-55770-9. DOI Living reference since 2017 DOI
2) BARDELLA L., NIORDSON C.F. (2020). Strain Gradient Plasticity: Theory and Implementation.
In: Mechanics of Strain Gradient Materials - CISM Lecture Notes vol. 600, pp. 101-149,
edited by A. Bertram and S. Forest, Springer, Cham.
ISBN: 978-3-030-43829-6.
DOI
ARTICOLI
SU RIVISTE INTERNAZIONALI
Copie degli articoli elencati in questa
pagina sono a disposizione di chi le richieda via e-mail o, a seconda dei diritti d'accesso e quando disponibile, cliccando su DOI
1) BARDELLA
L., GENNA F. (2001). On
the elastic behavior of syntactic foams. INTERNATIONAL JOURNAL OF SOLIDS
AND STRUCTURES. vol. 38/40-41, pp. 7235-7260 ISSN: 0020-7683.
DOI
2) BARDELLA
L., GENNA F. (2001).
Elastic design of syntactic foamed sandwiches obtained by filling of three-dimensional
sandwich-fabric panels. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES.
vol. 38/2, pp. 307-333 ISSN: 0020-7683.
DOI
3) BARDELLA L. (2001).
A phenomenological constitutive law for the nonlinear viscoelastic behaviour of epoxy resins in the glassy state.
EUROPEAN JOURNAL OF MECHANICS
A-SOLIDS. vol. 20/6, pp. 907-934 ISSN: 0997-7538.
DOI
4) BARDELLA L. (2003). An extension
of the Secant Method for the homogenization of the nonlinear behavior of
composite materials. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE. vol.
41/7, pp. 741-768 ISSN: 0020-7225.
DOI
5) BARDELLA
L., CARINI A., GENNA F.
(2003). Time integration errors and some new functionals for the dynamics
of a free mass. COMPUTERS & STRUCTURES. vol. 81/24-25, pp. 2361-2372
ISSN: 0045-7949.
DOI
6) BARDELLA L. (2003). Discussion on
the paper "Simulation of porosity by microballoon dispersion in epoxy
and urethane: Mechanical measurements and models" by M. A. El-Hadek
and H. V. Tippur, Journal of Materials Science, 37, 1649-1660, 2002, [1].
JOURNAL OF MATERIALS SCIENCE LETTERS. vol. 22/22, pp. 1643-1646 ISSN:
0261-8028.
DOI
7) BARDELLA L., GENNA F. (2005).
Newmark's time integration method from the discretization of extended functionals.
JOURNAL OF APPPLIED MECHANICS, Transactions of ASME. vol. 72/4, pp. 527-537
ISSN: 0021-8936.
DOI
8) BARDELLA L. (2006).
A deformation theory of strain gradient crystal plasticity that accounts for geometrically necessary dislocations.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. vol. 54/1, pp. 128-160 ISSN: 0022-5096.
DOI
9) BARDELLA L. (2007). Some remarks
on the strain gradient crystal plasticity modelling, with particular reference to the material
length scales involved. INTERNATIONAL JOURNAL OF PLASTICITY. vol. 23/2, pp. 296-322 ISSN: 0749-6419.
DOI
10) BARDELLA L., GIACOMINI A. (2008). Influence of material parameters and crystallography on the size effects
describable by means of strain gradient plasticity. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS.
vol. 56/9, pp. 2906-2934 ISSN: 0022-5096.
DOI
11) BARDELLA L. (2008). Reliability of First-Order Shear Deformation models for sandwich beams.
JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES. vol. 3/7, pp. 1187-1206 ISSN: 1559-3959.
DOI OpenAccess
12) BARDELLA L. (2009). A comparison between crystal and isotropic strain gradient
plasticity theories with accent on the role of the plastic spin.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS. vol. 28/3, pp. 638-646 ISSN: 0997-7538.
DOI
13) BARDELLA L. (2010). Size effects in phenomenological strain gradient plasticity constitutively involving the plastic spin.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE. vol. 48/5, pp. 550-568 ISSN: 0020-7225.
DOI
14) SBURLATI R., BARDELLA L. (2011).
Three-dimensional elastic solutions for functionally graded circular plates.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS. vol. 30/3, pp. 219-235 ISSN: 0997-7538.
DOI
15) BARDELLA L., BELLERI A. (2011).
Two features of the uniaxial compression of a glassy epoxy resin:
the yield stress rate-dependence and the volumetric instability.
MECHANICS OF TIME-DEPENDENT MATERIALS. vol. 15/3, pp. 255-275 ISSN: 1385-2000.
DOI
16) BARDELLA L., TONELLI D. (2012).
Explicit analytic solutions for the accurate evaluation of the shear stresses in sandwich beams.
JOURNAL OF ENGINEERING MECHANICS, Transactions of ASCE. vol. 138/5, pp. 502-507 ISSN: 0733-9399.
DOI
,
Erratum
J. ENG. MECH. vol. 138/10, p. 1302.
17) BARDELLA L., SFREDDO A., VENTURA C., PORFIRI M., GUPTA N. (2012).
A critical evaluation of micromechanical models for syntactic foams.
MECHANICS OF MATERIALS. vol. 50, pp. 53-69 ISSN: 0167-6636.
DOI
18) TONELLI D., BARDELLA L., MINELLI M. (2012).
A critical evaluation of mechanical models for sandwich beams.
JOURNAL OF SANDWICH STRUCTURES AND MATERIALS. vol. 14/6, pp. 629-654 ISSN: 1099-6362.
DOI
19) BARDELLA L., SEGURADO J., PANTEGHINI A., LLORCA J. (2013).
Latent hardening size effect in small-scale plasticity.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. vol. 21/5, 055009 (28 pagine) ISSN: 0965-0393. FEATURED ARTICLE.
DOI
20) BARDELLA L., MALANCA F., PONZO P., PANTEGHINI A., PORFIRI M. (2014).
A micromechanical model for quasi-brittle compressive failure of glass-microballoons/thermoset-matrix syntactic foams.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. vol. 34/11, pp. 2605-2616 ISSN: 0955-2219.
DOI
21) BARDELLA L., MATTEI O. (2014).
On explicit analytic solutions for the accurate evaluation of the shear stress in sandwich beams
with a clamped end.
COMPOSITE STRUCTURES. vol. 112, pp. 157-168 ISSN: 0263-8223.
DOI
,
Corrigendum
COMPOS. STRUCT. vol. 116, p. 849.
22) BARDELLA L., PATERLINI L., LERONNI A. (2014).
Accurate modelling of the linear elastic flexure of composite beams warped by midlayer slip,
with emphasis on concrete-timber systems.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES. vol. 87, pp. 268-280 ISSN: 0020-7403.
DOI
23) PANTEGHINI A., BARDELLA L. (2015).
On the compressive strength of glass microballoons-based syntactic foams.
MECHANICS OF MATERIALS. vol. 82, pp. 63-77 ISSN: 0167-6636.
DOI
24) BARDELLA L., PANTEGHINI A. (2015).
Modelling the torsion of thin metal wires by distortion gradient plasticity.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS.
vol. 78, pp. 467-492 ISSN: 0022-5096.
DOI
25) MATTEI O., BARDELLA L. (2016).
A structural model for plane sandwich beams including transverse core deformability and arbitrary boundary conditions.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS. vol. 58, pp. 172-186 ISSN: 0997-7538.
DOI
26) MARTÍNEZ-PAÑEDA E., NIORDSON C.F., BARDELLA L. (2016).
A finite element framework for distortion gradient plasticity
with applications to bending of thin foils.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES. vol. 96, pp. 288-299 ISSN: 0020-7693.
DOI OpenAccess
27) PANTEGHINI A., BARDELLA L. (2016).
On the Finite Element implementation of higher-order gradient plasticity,
with focus on theories based on plastic distortion incompatibility.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING. vol. 310, pp. 840-865 ISSN: 0045-7825.
DOI
28) PANTEGHINI A., BARDELLA L. (2017).
Structural theory and finite element modelling of linear elastic sandwich beams subject to severe boundary conditions.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS. vol. 61, pp. 393-407 ISSN: 0997-7538.
DOI
29) VOLPINI V., BARDELLA L., RODELLA A., CHA Y., PORFIRI M. (2017).
Modelling compression sensing in ionic polymer metal composites.
SMART MATERIALS AND STRUCTURES. vol. 26/3, 035030 (19 pagine) ISSN: 0964-1726.
DOI
30) PORFIRI M., LERONNI A., BARDELLA L. (2017).
An alternative explanation of back-relaxation in ionic polymer metal composites.
EXTREME MECHANICS LETTERS. vol. 13, pp. 78-83 ISSN: 2352-4316.
DOI OpenAccess
31) SHAMS A., PANTEGHINI A., BARDELLA L., PORFIRI M. (2017). A micromechanical model to study failure of polymer-glass syntactic foams at high strain rates. COMPUTATIONAL MATERIALS SCIENCE. vol. 135, pp. 189-204 ISSN: 0927-0256. DOI
32) BARDELLA L., PERINI G., PANTEGHINI A., TESSIER N., GUPTA N., PORFIRI M. (2018). Failure of glass-microballoons/thermoset-matrix syntactic foams subject to hydrostatic loading. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS. vol. 70, pp. 58-74 ISSN: 0997-7538. DOI
33) PANTEGHINI A., BARDELLA L. (2018). On the role of higher-order conditions in distortion gradient plasticity. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. vol. 118, pp. 293-321 ISSN: 0022-5096. DOI
34) LERONNI A., BARDELLA L. (2019). Influence of shear on sensing of ionic polymer metal composites. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS. vol. 77, 103750 (17 pagine) ISSN: 0997-7538. DOI
35) VOLPINI V., BARDELLA L., GEI M. (2019). A note on the solution of the electro-elastic boundary-value problem for rank-two laminates at finite strains. MECCANICA. vol. 54/13, pp. 1971-1982 Special Issue "Mechanics of Extreme Materials" ISSN: 0025-6455. DOI OpenAccess
36) PANTEGHINI A., BARDELLA L., NIORDSON C.F. (2019). A potential for higher-order phenomenological strain gradient plasticity to predict reliable response under non-proportional loading. PROCEEDINGS OF THE ROYAL SOCIETY A: MATHEMATICAL, PHYSICAL AND ENGINEERING SCIENCES. vol. 475/2229, 20190258 (21 pagine) ISSN: 1364-5021. DOI
37) BOLDINI A., BARDELLA L., PORFIRI M. (2020). On structural theories for ionic polymer metal composites: balancing between accuracy and simplicity. JOURNAL OF ELASTICITY. vol. 141/2, pp. 227 272 ISSN: 0374-3535. DOI
38) LERONNI A., BARDELLA L., DORFMANN L., PIETAK A., LEVIN M. (2020). On the coupling of mechanics with bioelectricity and its role in morphogenesis. JOURNAL OF THE ROYAL SOCIETY INTERFACE. vol. 17/167, 20200177 (12 pagine) ISSN: 1742-5689. DOI OpenAccess
39) PANTEGHINI A., BARDELLA L. (2020). Modelling the cyclic torsion of polycrystalline micron-sized copper wires by distortion gradient plasticity. PHILOSOPHICAL MAGAZINE. vol. 100/18, pp. 2352 2364 ISSN: 1478-6435. DOI
40) VOLPINI V., BARDELLA L. (2021). Asymptotic analysis of compression sensing in ionic polymer metal composites: the role of interphase regions with variable properties. MATHEMATICS IN ENGINEERING. vol. 3/2, pp. 1-31 ISSN: 2640-3501. DOI OpenAccess
41) LERONNI A., BARDELLA L. (2021). Modeling actuation and sensing in ionic polymer metal composites by electrochemo-poromechanics. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. vol. 148, 104292 (22 pagine) ISSN: 0022-5096. DOI
42) BARDELLA L. (2021). On a mixed energetic-dissipative constitutive law for non-proportional loading, with focus on small-scale plasticity. PROCEEDINGS OF THE ROYAL SOCIETY A: MATHEMATICAL, PHYSICAL AND ENGINEERING SCIENCES. vol. 477/2248, 20200940 (17 pagine) ISSN: 1364-5021. DOI
43) BARDELLA L., VOLPINI V., GEI M. (2022). On the effect of the volumetric deformation in soft dielectric composites with high phase contrast. JOURNAL OF ELASTICITY. vol. 148/2, pp. 167-198 ISSN: 0374-3535. DOI OpenAccess
44) RUBIN M.B., BARDELLA L. (2023). An Eulerian thermodynamical formulation of size-dependent plasticity. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. vol. 170, 105122 (20 pagine) ISSN: 0022-5096. DOI
45) PANTEGHINI A., BARDELLA L. (2023). Electrochemo-poromechanics of ionic polymer metal composites: Towards the accurate finite element modelling of actuation and sensing. JOURNAL OF ELASTICITY. vol. 153/3, pp. 299-358 ISSN: 0374-3535. DOI OpenAccess
46) BARDELLA L. (2023). Discussion on the paper by Schöftner, J., "A verified analytical sandwich beam model for soft and hard cores: comparison to existing analytical models and finite element calculations", Acta Mech, 234, 2543 2560 (2023). ACTA MECHANICA. vol. 234/11, pp. 5967-5972 ISSN: 0001-5970. DOI view-only full text
47) BARDELLA L., PANTEGHINI A. (2023). Electrochemo-poromechanics of ionic polymer metal composites: Identification of the model parameters. SMART MATERIALS AND STRUCTURES. vol. 32/11, 115031 (19 pagine) ISSN: 0964-1726. DOI OpenAccess
48) BARDELLA L. (2024). Explicit analytical solutions for the full plane-stress field in sandwich beams under flexure governed by zigzag warping. COMPOSITE STRUCTURES. vol. 329, 117754 (9 pagine) ISSN: 0263-8223. DOI OpenAccess HAL preprint
49) RUBIN M.B., BARDELLA L. (2024). Eulerian rates of elastic incompatibilities applied to size-dependent hardening in finite torsion. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. vol. 193, 105905 (20 pagine) ISSN: 0022-5096. DOI OpenAccess
50) PANTEGHINI A., BARDELLA L., RUBIN M.B. (2025). Modeling yield stress scaling and cyclic response using a size-dependent theory with two plasticity rate fields. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. vol. 194, 105930 (24 pagine) ISSN: 0022-5096. DOI OpenAccess
Articoli
1) BARDELLA L., GENNA F. (2000). Approximate computation of the elastic shear stiffness of a sandwich beam. GIMC 2000 - XIII Convegno di Meccanica Computazionale, Brescia. 13-15 novembre. (pp. 218-226). ISBN: 88-86524-47-1.
2) BARDELLA L., GENNA F. (2005). Some remarks on the micromechanical modeling of glass/epoxy syntactic foams. 20th Annual Technical Conference of the American Society for Composites, Philadelphia, PA (U.S.A.). 6-9 settembre. Atti a cura di F.K. Ko, G.R. Palmese, Y. Gogotsi, A.S.D. Wang. ISBN: 1-932078-50-9
Brevi note
1) BARDELLA L. (2000). The generalized plane stress state: backward Euler consistent algorithm for the J2-flow theory of plasticity with isotropic hardening. GIMC 2000 - XIII Convegno di Meccanica Computazionale, Brescia. 13-15 novembre. (pp. 60-64). ISBN: 88-86524-47-1.
2) BARDELLA L. (2000). A phenomenological constitutive law for epoxy resins. GIMC 2000 - XIII Convegno di Meccanica Computazionale, Brescia. 13-15 novembre. (pp. 65-71). ISBN: 88-86524-47-1.
3) PRANDINI M., BARDELLA L. (2000). Identification of a constitutive model for epoxy resins. GIMC 2000 - XIII Convegno di Meccanica Computazionale, Brescia. 13-15 novembre. (pp. 125-131). ISBN: 88-86524-47-1.
4) BARDELLA L. (2002). On the modeling of the nonlinear viscoelastic behavior of epoxy resins. Seventh Pan American Congress of Applied Mechanics (PACAM VII), Temuco (Cile). 2-4 gennaio. (vol. 9, pp. 229-232). Applied Mechanics in the Americas edited by P. Kittl, G. Diaz, D. Mook, J. Geer.
5) BARDELLA L., GENNA F. (2002). Unit cell analysis of the nonlinear behaviour of glass/epoxy syntactic foams. EUROMECH Colloquium 438 on Constitutive Equations for Polymer Microcomposites, Vienna (Austria). 15-17 luglio. (pp. 100-101). Book of Abstracts edited by L. Dorfmann, A.D. Drodzov, R.W. Ogden. ISBN: 3-900962-40-5.
6) BARDELLA L. (2007). A strain gradient crystal plasticity theory based on dislocation densities. Computational Plasticity IX. Fundamentals and Applications, Barcellona (Spagna). 5-7 settembre. (pp. 969-972). Atti a cura di E. Onate, D.R.J. Owen, B. Suarez. ISBN: 978-84-96736-27-6.
7) BARDELLA L., GIACOMINI A. (2007). Size effects and strain gradient plasticity: how many length scales should be involved in the modelling? AIMETA 2007: XVIII Congresso dell'Associazione Italiana di Meccanica Teorica e Applicata. Brescia. 11-14 settembre. Atti a cura di A. Carini, G. Mimmi, R. Piva. ISBN: 978-88-89720-69-1.
8) BARDELLA L., MINELLI M. (2007). On the accurate computation of the deflection of sandwich beams. AIMETA 2007: XVIII Congresso dell'Associazione Italiana di Meccanica Teorica e Applicata. Brescia. 11-14 settembre. Atti a cura di A. Carini, G. Mimmi, R. Piva. ISBN: 978-88-89720-69-1.
9) BARDELLA L. (2009). The influence of the dissipation due to the plastic spin on the size effects describable by means of isotropic strain gradient plasticity. AIMETA 2009: XIX Congresso dell'Associazione Italiana di Meccanica Teorica e Applicata. Ancona. 14-17 settembre. Atti a cura di S. Lenci. ISBN: 978-88-96378-08-3.
10) BARDELLA L., TONELLI D., MINELLI M. (2009). How to choose an analytical model for the stress state of sandwich beams under bending. AIMETA 2009: XIX Congresso dell'Associazione Italiana di Meccanica Teorica e Applicata. Ancona. 14-17 settembre. Atti a cura di S. Lenci. ISBN: 978-88-96378-08-3.
11) BARDELLA L., SEGURADO J. (2011). A comparison between strain gradient crystal plasticity and discrete dislocation dynamics. ICMM2: 2nd International Conference on Material Modelling. Parigi. 31 agosto-2 settembre. Book of abstracts a cura di J. Besson e M. Maziere. pp 189. ISBN: 978-2911256-61-5.
12) BARDELLA L., SEGURADO J. (2011). A comparison between strain gradient crystal plasticity and discrete dislocation dynamics. AIMETA 2011: XX Congresso dell'Associazione Italiana di Meccanica Teorica e Applicata. Bologna. 12-15 settembre. Atti a cura di a cura di F. Ubertini, E. Viola, S. de Miranda e G. Castellazzi. ISBN: 978-88-906340-0-0 (print, volume sommari) ISBN: 978-88-906340-1-7 (online, atti estesi).
13) BARDELLA L., SEGURADO J., PANTEGHINI A., LLORCA J. (2013). Latent hardening size effect in small-scale plasticity. Computational Plasticity XII. Fundamentals and Applications. Sessione su invito "Material Size-effects in Plasticity" organizzata da Viggo Tvergaard e Christian F. Niordson. Barcellona (Spagna). 3-5 settembre. Atti a cura di E. Onate, D.R.J. Owen, D. Peric, B. Suarez. ISBN: 978-84-941531-5-0.
14) BARDELLA L., PANTEGHINI A. (2015). Modelling the torsion of thin metal wires by phenomenological distortion gradient plasticity. AIMETA 2015: XXII Congresso dell'Associazione Italiana di Meccanica Teorica e Applicata. Genova. 14-17 settembre. Atti a cura di L. Gambarotta e A. Morro. ISBN: 978-88-97752-52-3.
15) PANTEGHINI A., BARDELLA L. (2016). On the Finite Element implementation of higher-order gradient plasticity, with focus on theories based on plastic distortion incompatibility. XXI Convegno Nazionale di Meccanica Computazionale e VIII Riunione del Gruppo Materiali AIMETA (GIMC-GMA 2016), Lucca (IT). 27-29 giugno. Atti a cura di M. Paggi, A. Bacigalupo, S. Bennati, C. Borri, M. Corrado, A. Gizzi, P.S. Valvo. Tipolitografia Contini, Sesto Fiorentino (Firenze). ISBN: 9791220013338.
16) VOLPINI V., RODELLA A., BARDELLA L., CHA Y., PORFIRI M. (2016). Modelling the sensing response of Ionic Polymer Metal Composites subject to through-the-thickness compression. XXI Convegno Nazionale di Meccanica Computazionale e VIII Riunione del Gruppo Materiali AIMETA (GIMC-GMA 2016), Lucca (IT). 27-29 giugno. Atti a cura di M. Paggi, A. Bacigalupo, S. Bennati, C. Borri, M. Corrado, A. Gizzi, P.S. Valvo. Tipolitografia Contini, Sesto Fiorentino (Firenze). ISBN: 9791220013338.
17) VOLPINI V., BARDELLA L., RODELLA A., CHA Y., PORFIRI M. (2017). A theoretical framework for the study of compression sensing in ionic polymer metal composites. Electroactive Polymer Actuators and Devices (EAPAD) XIX Conference, Portland, OR (USA). 26-29 marzo. Atti a cura di Yoseph Bar-Cohen. Proc. Society of Photo-Optical Instrumentation Engineers (SPIE) 10163, EAPAD 101630M (April 17, 2017). DOI
18) PANTEGHINI A., BARDELLA L. (2018). H(curl) finite element analysis of distortion gradient plasticity. IUTAM Symposium on Size-Effects in Microstructure and Damage Evolution, Kgs. Lyngby (Danimarca). 27 maggio-1 giugno. Atti a cura di K.L. Nielsen, C.F. Niordson, V. Tvergaard. DTU Mechanical Engineering, Section of Solid Mechanics, Technical University of Denmark. Nils KLoppels Allé, Bld. 404, DK-2800 Kgs. Lyngby. ISBN: 978-87-7475-521-0.
19) BOLDINI A., BARDELLA L., PORFIRI M. (2020). On structural models for ionic polymer metal composites. (SPIE Best Student Paper Finalist) Electroactive Polymer Actuators and Devices (EAPAD) XXII Conference. Atti a cura di Yoseph Bar-Cohen. Proc. Society of Photo-Optical Instrumentation Engineers (SPIE) 11375, EAPAD 113751B (April 22, 2020). DOI
20) BARDELLA L., PANTEGHINI A. (2023). Electrochemo-poromechanics of ionic polymer metal composites: Theory and numerics. XXIII Convegno Gruppo Italiano di Meccanica Computazionale, X Convegno Gruppo Meccanica dei Materiali e II Convegno Gruppo BioMeccanica (GIMC GMA GBMA 2023), Reggio Calabria (IT). 12-14 luglio, Atti a cura di P. Fuschi, A.A. Pisano. Edizioni Centro Stampa di Ateneo, Università degli Studi di Reggio Calabria "Mediterranea". pp 76-77. ISBN: 978-88-99352-95-0.
21) LERONNI A., FLECK N.A., BARDELLA L. (2023). Coupling mechanics with species diffusion in engineering modelling. XXIII Convegno Gruppo Italiano di Meccanica Computazionale, X Convegno Gruppo Meccanica dei Materiali e II Convegno Gruppo BioMeccanica (GIMC GMA GBMA 2023), Reggio Calabria (IT). 12-14 luglio, Atti a cura di P. Fuschi, A.A. Pisano. Edizioni Centro Stampa di Ateneo, Università degli Studi di Reggio Calabria "Mediterranea". p 22. ISBN: 978-88-99352-95-0.
22) BARDELLA L., RUBIN M.B. (2024). Size-dependent elastoplasticity relying on Eulerian rates of elastic incompatibilities. MFO Workshop 2410 on Mechanics of Materials: Multiscale Design of Advanced Materials and Structures, Oberwolfach (Germania), 3-8 marzo, Atti a cura di S. Forest, D. McDowell, S. Müller, E. Werner. Oberwolfach Reports 21(1) 657-730, EMS Press. Presentazione su invito, p 677-682 DOI
1) BARDELLA L., PAGGI M., VENA P. (2018). Special issue on "Recent Advances on the Mechanics of Materials". MECCANICA. vol. 53/3, pp. 509-510 ISSN: 0025-6455. DOI OpenAccess
2) PUNETHA V.D., BARDELLA L., LUQMAN M. (2024). Introduction to "Multimodal remote actuation and sensing in polymer nanocomposites for advanced applications". MATERIALS ADVANCES. vol. 5/20, pp. 7844-7846 ISSN: 2633-5409. DOI OpenAccess
1) BARDELLA L. (2016). Sistemi piani di travi staticamente determinati - Esercizi di Scienza delle Costruzioni con elementi di teoria. Terza Edizione Riveduta. Edizioni Snoopy, Brescia. ISBN: 978-88-89252-24-6.